UAS-AIR-CPM
- UAS-AIR-CPM [ code. 1352 ]
Configuration of Point-to-Point and Point-Multipoint links
- Share the information about this course
Content and access to the course
Course content
This course includes
-
Certification Exam
UAS-AIR-CPM [ code. 1352 ] - Certificate of Approval issued by Academy Xperts
- Study Book + Laboratory Manual
- Preparation questionnaires by Chapters
- Certification Exam at no cost
- Permanent access to the training portal
- Access to all future Content updates
About the online course
- Live Trainer
- 8 hours long (2 days, 4 hours each day)
- Study Book + Laboratory Manual
- The course is approved with a score equal to or greater than 7.5/10 (75%)
- Course level: Basic
Pre requirements
- Have made basic configurations on Ubiquiti equipment
- It is suggested to have basic knowledge of WiFi networks (802.11)
- Basic understanding and use of computers
What you need to attend the OnLine course
- Internet connection of at least 1 Mbps
- Laptop or desktop computer preferably
- Tablet or cell phone are an alternative
UAS-AIR-CPM instructors
louis square
- Project Engineer
- Systems Engineer (Telematics)
- MikroTik Trainer (since 2017)
- Ubiquiti Trainer (since 2012)
- Trainer Cambium Networks (since 2019)
- Trainer Academy Xperts (since 2012)
Kevin Moran
- Project Engineer
- Systems Engineer (Telematics)
- MikroTik Trainer (since 2016)
- Ubiquiti Trainer (since 2016)
- Trainer Academy Xperts (since 2015)
Darwin Barzola
- Project Engineer
- Bachelor in Networks and Operating Systems
- MikroTik Trainer (since 2016)
- Ubiquiti Trainer (since 2015)
- Trainer Academy Xperts (since 2014)
Course Objectives
The UAS-AIR-CPM (PtP and PtMP Link Configuration with Ubiquiti airMAX) course is designed to provide students with a detailed understanding of Point-to-Point and Point-to-Multipoint links using the Ubiquiti airMAX system.
In this course, students will learn about key wireless concepts and parameters, as well as gain skills in selecting frequencies, channel width, and configuring equipment.
Chapter 1: Introduction
The basic concepts of radio links are addressed and their advantages and disadvantages are presented. Likewise, the design of a radio link is explained and the different types of radio links are detailed.
The communications network is introduced and the tools necessary to access and configure airMAX equipment are described.
The labs show how to perform a factory reset and how to access and configure airMAX devices for labs.
Chapter 2: Point to Point Links
It delves into the different aspects related to point-to-point links. Operating modes, RF systems, wireless parameters and indicators are explained.
Likewise, the different types of links are described according to their distance and performance, and the equipment necessary for their configuration is detailed. The labs show how to configure a point-to-point link, as well as frequency and channel width selection.
Chapter 3: Multipoint Links
This Chapter introduces the configuration of multipoint links. The different equipment necessary for the configuration of base stations and subscribers is described, and the different antennas available for the base station are presented.
In addition, the new LTU multipoint solution is presented. The AirMAX TDMA system is delved into and the different network modes are described. The labs show how to configure a multipoint link and detail different aspects such as management and service VLANs, Layer 3 CPE equipment, PPPoE, static addressing, and port forwarding.
Bandwidth limitation is also introduced.
Chapter 4: Tools
Different useful tools for configuring and monitoring wireless links are described.
The operation of tools such as Ping/Traceroute, Discovery, Antenna Alignment, Speed Meter, Spectrum Analyzer, Waveform View, Source View, Ambient Noise Level, Site Inspection and Constellation Diagram is explained.
By the end
With this course, participants will acquire the necessary knowledge to design and configure point-to-point and point-multipoint wireless links with Ubiquiti airMAX technology, as well as to perform their monitoring and maintenance.
Upcoming UAS-AIR-CPM courses
Do you need more info?
Participate in the Live Course
Periodically (usually once a month) we run this course for free, and you can participate as many times as you want.
Live Trainer
This modality is carried out with a Live Trainer (on-line) so you can consult the Instructor with all the concerns that have arisen during your self-study or during the development of the course.
Registration
Leave us your information (form above) so we can notify you when we teach a new OnLine Course.
Certification
Once the course is completed you will be able to take your Certification Exam.
Verify Certificate
You can verify the veracity of all your Academy Xperts certificates at any time.
https://www.abcxperts.com/verificar-certificado/
Certification Exam
Only students who pass the Exam will receive the PDF Certificate.
Online Exam
The exam is taken online on this platform
30 questions
Time 1 hour
Approval
The Exam is passed with a score of 75%
You automatically have a second chance.
Digital Certificate
The Certificate of Attendance and Participation is issued immediately in PDF format on this platform.
