In RouterOS, a PPPoE disconnection that is signaled as a “peer request” typically occurs when the peer (that is, the other end of the PPPoE connection, which is typically the ISP's PPPoE server) requests to terminate the session. At the end of the article you will find a small test that
The “Broadcast” mode in the “bonding” configuration on MikroTik devices is a specialized configuration used to combine multiple network interfaces into a single logical connection. This method is especially useful for increasing the total available bandwidth and providing redundancy. At the end of the article
Scenario: A LAG (Link Aggregation Group) interface has been created to increase the total bandwidth between two network nodes, usually switches. To test that the LAG interface is working correctly, two servers transferring data have been connected, commonly using the network performance measurement tool
Bonding balance-alb (Adaptive Load Balancing) in MikroTik RouterOS is an advanced network link bundling (bonding) technique that allows multiple network interfaces to be combined into a single logical entity. This technique is used to improve network redundancy and performance. At the end of the article
Consider the following scenario: A bridge has been configured with hardware offloading enabled to maximize network performance on a RouterOS device. Due to this configuration, the device functions as a switch instead of a simple bridge at the software level. This improves
Let's imagine a network device with a built-in switch chip, configured to manage traffic between multiple ports. To isolate certain ports from each other, several bridges have been created. Hardware offload functionality has been enabled on these bridges with the aim of improving performance by allowing
The Active Backup bonding method, also known as active-backup, is one of the link aggregation techniques that you can use on MikroTik devices with RouterOS. Unlike other bonding methods such as balance-xor or 802.3ad, the main goal of active-backup is to provide redundancy rather than balancing
The XOR bonding method, also known as balance-xor, is another form of link aggregation that can be used on MikroTik devices running RouterOS. This method combines multiple physical network links to act as a single logical link. Unlike LACP (802.3ad), balance-xor uses a
DHCPv6-PD (Prefix Delegation) This method is used in larger networks, such as Internet Service Providers (ISPs). Allows a DHCPv6 router to delegate blocks of IPv6 addresses to subnets
Routing is an essential function that allows efficient flow of data between different devices. Within this context, two critical concepts are the RIB (Routing Information Base) and
In network environments, the availability and reliability of services are essential to ensure uninterrupted operation. Router redundancy protocols play a crucial role in
Internet Control Message Protocol version 6 (ICMPv6) is an essential component of IPv6, the latest version of the Internet Protocol that will gradually replace IPv4 due to the increasing
To ensure that data flows efficiently and smoothly over a network, it is essential that consistency in data transmission is maintained. One
In the world of computer networks, layering is a fundamental technique for understanding and designing communication systems. Two of the most crucial layers in this
IPv6 subnetting is the process of dividing an IPv6 network into smaller subnets. This is done to increase network security, performance, and scalability.
Network virtualization has revolutionized the way we design, manage and scale IT infrastructures. A key technology that has made this revolution possible is VXLAN (Virtual Extensible
The MLAG implementation in RouterOS allows the Link Aggregation Control Protocol (LACP) to be configured on two separate devices, while the client believes it is connected to the same one
Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) allow the MikroTik bridge to listen to IGMP/MLD communications and make monitoring decisions.
In computer networks, visibility is key to understanding and optimizing performance. An essential tool to achieve this visibility is Port Mirroring, also known as SPAN (Switched
BGP is typically configured to establish direct neighbor sessions. However, in some cases, it may be beneficial to allow BGP sessions to span multiple hops.
Content Delivery Systems, or CDNs, are a cornerstone in the quest to improve the speed, reliability and efficiency of content delivery in the era
One of the essential pillars that support this security is the Internet Security Protocol (IPsec). In this article, we will explore in detail what IPsec is, its history, concepts, benefits,
SD-WAN (Software-Defined Wide Area Network) is an approach to the design and implementation of wide area networks that uses abstraction
Software-Defined Networking (SDN) is an approach to network management that allows network administrators to manage, configure, and optimize network resources.
Study material for the MTCNA Certification Course, updated to RouterOS v7
Av. Juan T. Marengo and J. Orrantia
Professional Center Building, Office 507
Guayaquil. Ecuador
Zip Code 090505
to our weekly newsletters
Copyright © 2024 abcxperts.com – All Rights Reserved
Take advantage of the Three Kings Day discount code!
Take advantage of the New Year's Eve discount code!
Take advantage of the discount code for Christmas!!!
all MikroTik OnLine courses
all Academy courses
all MikroTik Books and Book Packs
Take advantage of the discount codes for Cyber Week!!!
all MikroTik OnLine courses
all Academy courses
all MikroTik Books and Book Packs
Take advantage of the discount codes for Black Friday!!!
**Codes are applied in the shopping cart
Take advantage of discount codes for Halloween.
Codes are applied in the shopping cart
11% discount on all MikroTik OnLine courses
11%
30% discount on all Academy courses
30%
25% discount on all MikroTik Books and Book Packs
25%
