Ways to Assign IPv6 Addressing (Part 2)
March 25th, 2024
MTCNA
- MTCNA [ code. 4001 ]
MikroTik Certified Network Associate
Enroll in MikroTik's MTCNA course today and become a networking expert! You will learn how to configure networks with RouterOS and improve your skills in managing routers and switches. Don't miss the opportunity to advance your professional career!
- Share the information about this course
Facebook
Twitter
LinkedIn
WhatsApp
Telegram
Content and access to the course
Course content
MTCNA: Before You Begin
MTCNA: Chapter 1
MTCNA: Chapter 2
MTCNA: Chapter 3
MTCNA: Chapter 4
MTCNA: Chapter 5
MTCNA: Chapter 6
MTCNA: Chapter 7
MTCNA: Chapter 8
MTCNA: Chapter 9
This course includes
- Certificate of Attendance/Participation issued by Academy Xperts
- Study Book + Laboratory Manual
- Preparation questionnaires by Chapters
- Permanent access to the training portal
- Access to all future Content updates
About the online course
- Live Trainer
- 25 hours long (5 days, 5 hours each day)
- Certification is obtained with a score equal to or greater than 6.0/10 (60%)
- El certification exam can only be rendered in-person or
- Course level: Basic-Intermediate
Pre requirements
- Be clear about LAN & WAN network concepts
- Have a theoretical base of Wireless (WiFi 802.11)
- Solid knowledge of IP Addressing, Subnetting and VLSM. It is suggested to have previously taken the NAS-CBR course
What you need to attend the OnLine course
- Internet connection of at least 1 Mbps
- Laptop or desktop computer preferably
- Tablet or cell phone are an alternative
From our Blog...
MTCNA Instructors
Yomayra Valdez
- Sales executive
- Networking and Telecommunications Engineer
- MikroTik Trainer (since 2018)
- Trainer Academy Xperts (since 2018)
Kevin Moran
- Project Engineer
- Systems Engineer (Telematics)
- MikroTik Trainer (since 2016)
- Ubiquiti Trainer (since 2016)
- Trainer Academy Xperts (since 2015)
louis square
- Project Engineer
- Systems Engineer (Telematics)
- MikroTik Trainer (since 2017)
- Ubiquiti Trainer (since 2012)
- Trainer Cambium Networks (since 2019)
- Trainer Academy Xperts (since 2012)
Ingrid Espinoza
- Project Engineer
- Networking and Telecommunications Engineer
- MikroTik Trainer (since 2017)
- Trainer Academy Xperts (since 2016)
Darwin Barzola
- Project Engineer
- Bachelor in Networks and Operating Systems
- MikroTik Trainer (since 2016)
- Ubiquiti Trainer (since 2015)
- Trainer Academy Xperts (since 2014)
Mauro Escalante
- CEO & CTO Academy Xperts
- Engineering in Computer Science
- MikroTik Trainer (since 2009)
- Trainer Academy Xperts (since 2011)
- Network Analysis and Troubleshooting Specialist
Course Objectives
The MTCNA (MikroTik Certified Network Associate) Course aims to provide participants with a solid understanding of the RouterOS platform and basic configuration of MikroTik devices.
Chapter 1: RouterOS
Introduction to MikroTik RouterOS, exploring its architecture and the functionalities of versions 6 and 7. The different MikroTik products, router access methods, basic configuration, firmware update, user and service administration, backups and license installation are covered.
Chapter 2: Static Routing
The principles of static routing are covered, including concepts such as bogon IPs and routing, understanding metrics, selecting the best route, and managing the routing table.
Chapter 3: Bridge
This chapter focuses on the physical and data link layers, covering physical media, MAC addresses, IP addresses, address classification, and differences between IPv4 and IPv6.
Chapter 4: Wireless (IEEE 802.11)
The IEEE 802.11 standards for wireless networks, frequencies, channel configuration, data rates, modulation, MAC filtering, coverage improvement, and monitoring tools are detailed.
Chapter 5: Network Management
It covers network management, ARP and RARP protocols, DHCP server and client, and provides a hands-on lab and review questions to consolidate learning.
Chapter 6: Firewall
The operation of the Firewall, packet flow, Connection Tracking, chain structure and actions, protection of routers and clients, address-lists, and NAT are explained.
Chapter 7: Simple Queues and QoS
Introduces changes to RouterOS v6, rate limiting concepts, Simple Queues operation, flow identification, HTB, queue types, and PCQ.
Chapter 8: PPP Tunnels
Introduces PPP Tunnels, /ppp configurations, PPPoE, IPIP, EoIP, PPTP, L2TP, SSTP, and OpenVPN, and discusses configuring routes through tunnels.
Chapter 9: RouterOS Tools
Explore tools such as Email, Netwatch, Ping, Traceroute, Profile, Torch, SNMP, System Identity, IP Neighbor, Helpdesk, and other diagnostic and monitoring tools.
By the end
At the end of this course, participants should be able to configure and manage MikroTik devices with RouterOS in small and medium-sized networks, in addition to being prepared for the MTCNA certification exam.
Acquire this Course
From our Blog...
Neighbor Discovery Protocol (Part 1)
13 September, 2023
HSRP, VRRP, GLBP: Understanding Key Protocols for Network Redundancy
December 21, 2023
Between Stateful and Stateless: Mastering the MikroTik Firewall
December 21, 2023
Digital Modulations: How They Work and Why They Are Important
January 3, 2024
Upcoming MTCNA courses
Loading view.
Do you need more info?
We invite you to leave us your information to answer your questions.
Related courses that may interest you
Essential knowledge that you must have for this course
It is important that you are familiar with various networking concepts, without which your learning process could slow down. Below we leave you a list of videos for you to review if your knowledge on these topics is not very clear.
subnetting
summarization
VLSM
MTCNA Frequently Asked Questions
It is a training program that prepares students to obtain the MikroTik MTCNA certification. This certification demonstrates that the holder has in-depth knowledge of MikroTik networks and devices and is qualified to configure, manage and maintain MikroTik networks.
This course usually lasts 24 hours spread over several days, although this may vary depending on the teaching modality (in-person or online).
You must have good knowledge of subnetting, VLSM, OSI model, TCP/IP model, basic concepts of LAN networks, wireless networks.
You should know:
- What is an IP address
- What is a subnet-mask
- What is a Gateway and what is DNS
You must have basic computer skills (know how to configure the computer's IP address, mask, gateway, DNS, and know how to use the terminal).
To know if you are prepared for the MTCNA course, it is suggested that you take the following knowledge test, which is free of charge: https://abcxperts.com/cursos/estas-listo-para-mtcna/
To become MikroTik MTCNA certified, you must complete the certification course and pass a final exam. The exam is taken at a MikroTik-accredited exam center and consists of a theoretical test.
The MikroTik MTCNA certification allows you to demonstrate your knowledge and skills in using MikroTik networks and devices, which can open up employment opportunities and increase your salaries. In addition, the certification is recognized internationally and allows you to access different exclusive MikroTik resources and tools.
Have a MikroTik account (mikrotik.com) allows the student to officially register for the Certification Course they are taking (the final registration is done by the Trainer on the first day of class)
Additionally, the Certification Exam is taken through the MikroTik account and if passed, the digital certificate is deposited in said account.
At the beginning of the COVID-19 pandemic (2020), MikroTik authorized all Trainers to give Certification Courses ON-LINE
However, the Certification Exam must be taken in person, except for the Renewal Exam, which can be taken remotely through the system. MTCOPS implemented by MikroTik.
If it is the first time that the exam for any certification is being given, it must be taken in person in front of the Trainer, this is by MikroTik regulations since it is necessary to verify who the person is who is going to give the exam.
On the day of the exam, the Trainer will take a group photo with the students and upload it to the MikroTik portal in order to activate the exam. If the photo is not uploaded, the Trainer will not be able to enable the exam.
If it is a Renewal Exam, then it can be taken remotely through the system MTCOPS implemented by MikroTik.
For renew Any MikroTik Certification can be done remotely through the system MTCOPS implemented by MikroTik.
For more details on the MTCOPS remote exam you can access the following link: https://abcxperts.com/mtcops-mikrotik-certification-test-online-proctoring-system/
La minimum grade is 60% over 100%.
If between 50% and 59% is obtained, the student has the right to a second opportunity to take a new exam, which must be taken at that same moment.
There is no third chance.
As soon as the exam is finished, the system automatically displays the grade.
Additionally, within the account managed by each student in MikroTik (mikrotik.com), in the left menu of said portal you will find the option MY TRAINING SESSIONS where you can view all the courses you have taken with their respective notes.
To retake the certification exam, you only have to pay the exam fee.
To find out the price, contact your sales agent.
Each student receives a RouterOS level 4 (L4) license.
You must access your MikroTik account (mikrotik.com) and then go left side to the option MAKE A KEY FROM PREPAID KEY
No. Each MikroTik certification must be renewed independently.
This means that to renew your MTCNA certification you must retake the MTCNA Certification Exam.
It is not mandatory to retake the MTCNA course. You can take the certification exam directly when it is a renewal.
To validate MikroTik certifications we can do so through the following link: https://mikrotik.com/certificateSearch
If you do not pass the exam after a month, you can take it again.
It is not mandatory to take the MTCNA course again, and you can take the exam directly.
To download the MTCNA certificate you must enter your personal account at mikrotik.com and in the left menu go to the option MY CERTIFICATES
MikroTik MTCNA Certification Exam
In-person exam
In the presence of an authorized MikroTik Trainer
25 questions
Time 1 hour
Approval
The Exam is passed with a score of 60%
If your score is between 50 and 59 you have a second chance.
Digital Certificate
The Certificate of Approval is issued immediately in PDF format on the MikroTik platform
Certificate of Attendance and Participation in the MTCNA Course
- Academy Xperts issues a Certificate of Attendance and Participation to the course Certification. To receive it, the student must take a Final Evaluation Exam on this platform and approve it with a score of 75%.
- This Certificate of Attendance does not accredit or replace the MikroTik Certification Exam issued by MikroTik Latvia, it being mandatory that said certification exam be taken in person.
Online Exam
The exam is taken online on this platform
30 questions
Time 1 hour
Approval
The Exam is passed with a score of 75%
You automatically have a second chance.
Digital Certificate
The Certificate of Attendance and Participation is issued immediately in PDF format on this platform.
