The ether10 “PoE Out” port on a MikroTik RB2011UiAS-2HnD-IN device (as an example of the RB2011 series that offers support for PoE out) is capable of supplying power to compatible devices over Ethernet (PoE).
However, compatibility for powering devices from other brands will depend on several key factors:
1. PoE standard
First, it is important to understand the PoE standard used by the ether10 port on the MikroTik RB2011. MikroTik uses the passive PoE standard in many of its devices, including the RB2011UiAS-2HnD-IN. Passive PoE does not follow the handshake protocol found in standard PoE (IEEE 802.3af/at), meaning it always supplies power through certain pins without checking with the receiving device.
2. Voltage and Power Consumption
The ether10 port on the RB2011 can supply a specific voltage (usually 24V in passive PoE, although the exact voltage can vary and should be verified in the specifications of the specific model). For a non-brand device to be compatible, it must be able to operate at the same voltage and not exceed the maximum current capability that the RB2011's PoE port can deliver.
3. Pin Configuration
Passive PoE can use different pin configurations to transmit power. It is crucial that both the MikroTik device and the receiving device agree on which pins are used for power transmission. In most cases, passive PoE uses pins 4/5 for positive and 7/8 for negative, but it is always advisable to check the documentation to be sure.
Recommendations:
- Review Specifications: Before attempting to power a third-party device with MikroTik equipment, carefully review the specifications of both devices to ensure that they are compatible in terms of voltage, current, and pinout.
- Use an Adapter if Necessary: If the device you want to power requires a different PoE standard (such as IEEE 802.3af/at), consider using a PoE adapter (a PoE splitter, for example) that can convert from passive PoE to the version required by your device.
- Caution with Sensitive Devices: Use caution when connecting sensitive devices directly to passive PoE sources, as failure to negotiate may result in damage if the device does not support the supplied power specifications.
In summary, the ether10 “PoE Out” port of a MikroTik RB2011 device can be used to power devices from other brands, as long as those devices are compatible with the passive PoE voltage, power consumption, and pin configuration of the MikroTik .
It is always prudent to review technical specifications and take precautionary measures to avoid damage to equipment.
There are no tags for this post.